We believe that smart ideas can turn the city into a better place. Like a dancing traffic light manikin that makes people wait and watch rather than walk through the red light. FOR more safety. #WhatAreYouFOR
Marshalls PC40 Combined Coping Tactile Unit incorporates innovative Dual Pour Concrete Technology to create a single unit which is easier and quicker to install.
This product was first developed for London Underground.
No other manufacturer is able to offer a DDA Compliant Combined Coping and Tactile Unit.
This Combined Coping Tactile Unit negates the need for steel preparation works under the platform.
Consistent alignment aids the aesthetic result.
3 colours available for both the coping and tactile units.
STEP-SAFE® ada detectable warning tiles and surface applied mats alert the disabled or visually impaired of approaching hazards particularly on sidewalks, curbs, subway and rail platforms, along travel routes, public buildings and other rights of way.
STEP-SAFE® ada detectable warning tiles and surface applied mats are designed to meet the requirements of the ADA and ABA Accessibility Guidelines for Buildings and Facilities published in the Federal Register July 23, 2004 and amended on August 5, 2005.
We offer ada detectable warning systems in several products. Surface applied Mats made of a composite resin that is applied with our STEP-SAFE® adhesive — no drilling is required making it the easiest surface applied ada mat to install. Our Polymer Concrete tile is 3x stronger than regular concrete. The dome and textured surface on all of our products are specially engineered for skid resistance. Maintenance free, color thru so they will not fade and a 5 year warranty assures a durable surface.
There is a new kind of speed bump that barely exists if your vehicle respects the speed limit, but hardens if you don’t. An entrepreneur from Málaga has developed this bump alongside the Badennova company. Inside there is a non-Newtonian liquid that, at slow speeds behaves like a liquid, but at high speeds hardens on impact to create a bump. It is being implemented in Spanish territory and every day there are more requests for it from countries such as the United States or Argentina.
No more getting angry at Speed bumps!
The Spanish Company Badennova S.L has developed the world´s first liquid speed bump. This intelligent road safety device can hardly be noticed by those drivers respecting the permitted speed. For those vehicles exceeding a certain speed limit, however, the «liquid» bump hardens and therefore becomes an obstacle.
A system to use drones to scan and then repair pot holes in roads using a 3D printing attachment was demonstrated by a team from the University of Leeds as part of the Robots for Resilient Infrastructure Robotic Challenge Event that took place on 27 to 28 June at Weetwood Hall, Leeds.
The event in UK Robotics Week 2017 showcased the current state-of-the-art of robotics for infrastructure through a packed programme of talks and demonstrations. It brought together over 80 academics, industry, policy makers and stakeholders to explore the use of robotics in the creation, inspection, repair and maintenance of critical infrastructure. Here Jake Smith explains the demonstration and the value of attending the Robotics Challenge Event. This drone system is being developed by researchers at the University of Leeds as part of the Self Repairing Cities project, with the extruder system being developed by project partner UCL.
Global Road Technology utilises the latest in Road Maintenance Software (RMS) to evaluate, plan and implement maintenance assignments.
Using a combination of aerial drone technology fitted with specialist equipment and cutting-edge software on the ground, GRT is able to acquire fast and reliable multi spectral spatial data and carry out near real time road condition monitoring (including gathering surface condition and structural stability information).
These methods significantly improve the cost efficiency of maintenance projects as well as reducing the overall completion time.
The technology that startup MX3D is developing to 3D print a bridge in Amsterdam could be used to produce «endless» different structures, says Dutch designer Joris Laarman in this exclusive movie.
MX3D is a new research and development company co-founded by Laarman and Tim Geurtjens, which plans to use robots to produce the worlds first functional 3D-printed steel bridge over an Amsterdam canal by 2017.
«The basics of the technology is pretty simple,» Laarman explains in the movie, which was filmed at MX3Ds workshop in Amsterdam. «Were using an industrial robot that is usually used in assembly lines in the car industry. We have combined this with a welding machine and our own software to have it 3D print in metal.»
The six-axis robots that MX3D are adapting are able to rotate their arms along six different planes of movement. They build up structures by depositing small quantities of steel in layers.
Unlike traditional 3D printers, robots can produce much larger structures by moving across them as they print.
«Youre not limited by size, so we can theoretically print endlessly big,» Laarman says.
The steel footbridge will span eight metres. MX3D originally intended to print the bridge in situ, but had to abandon that plan over health and safety concerns. Laarman and his team will now reconstruct a section of the canal in their workshop to demonstrate that it could be done on site.
The bridge will be printed in one piece, with the robots printing a load-bearing structure to support their own weight as they work.
«The bridge is going to be fairly small – its a pedestrian bridge,» Laarman says. «Its still a huge challenge, because we want to print it in one go. We want the robots to print their own support structure as they move over the water.»
