It was in spring this year when I picked up this beaten up antique hand cranked hammer drill. My friend has found it on the steel waste together with the german „Weltrekord“ ratchet screwdriver. The condition of the drill was super bad. It was very corroded, had a lot of missing screws, the handle was in very bad condition and the crank was bent so much you couldnt even make a full turn. Thats all said, it was the perfect item for a new restoration video.
At first I thought this should be a quick and easy project, but one problem after the other became visible and it turned out to be a real challenge. There was the big dent in the left side of the case. Usually you cant bend casted parts, but with a bit of heat and careful pressure on the arbor press I was able to remove it a bit. It also worked to get rid of the warping with some heat. For the finish of the housing I wanted to have an antique cast aluminium look. I thought it would look very cool if I could tumbler these parts after sandblasting. I ended up building a huge rotary tumbler from scratch and it worked very well (video link below).
Another big issue was the tool holder and the drill bit, as they were both completly rusted. Big thanks to @Hand Tool Rescue at this point for helping me out with the dimensions on these two parts by disassembling and measuring his own hammer drill. After a bit of search on eBay I found a set of original Rawlplug drill bits. After they arrived I was able to measure the shaft and the taper of the drill to then turn a new tool holder. It all worked out very well and yes, the drill only holds with the taper ;-)
Before I even started this project I just had one question in mind „How am I going to replace the messed up handle cover?“. My first idea was to wrap it in nice black leather like steering wheels are made. That would definitely work, but thats something Ive never done before so I was quite sceptical. Then the idea of a heat shrink tube came up. That would be a very easy solution, but heat shrink tubes dont have any structuires to it and it wouldnt quite fit the the rest of the tool. Thanks to the research of my Patreons and channel members, they have found very special heat shrink tubes that have a structure in it. I really liked it as it almost looked exactly the same like the original handle.
After all it was a very intense and time consuming project. Ive done so many hours of research on this one and I had to learn new skills. Im very happy how it turned out.
I hope you like my work and the video.
Huge thank you to all of my Patreon supporters and specially to:
Tonya M Broerman
Zack Thompson
Adel AlSaffar
afreeflyingsoul
Yale Baker
Gregory
Alex McGeorge
Alistair Moor
Amar.k
Bendurion
Courtney Maleport
David Barker
Greg Marston
Joshua Bentley
Lambda GPU Workstations
Luke Schmick
Luke Stone
Matt Bosch
Mellissa Marcus
Mike Schlodder
Monte Gibbs
Muzaffer Aksoy
Nick Houston
Paul Mampilly
potokslow
Todd Medbury
Vickie Bligh
Vince Valenti
Xavier Carbel
Yuri Zapuchlak
Aaron Quante
Alex Breton
alex latzko
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
Brandon Fitzwater
Brian Newton
Carlo
Chad Bryant
Chris Simondet
Grok Senften
Haley McFadden
Harper Kim
Hunter R.
Jason Koi
Jason Tarlov
Jeremy Cole
Jonas Richartz
Jordan Page
justin f.
Kelly Imgrund
Kurt Gazow
Marc Cerisier
Marius Costan
Martin Rønnow Klarlund
Mellissa McConnell
Michael Bier
Mickey Eisenhorn
Mike Donaldson
Nick Cannon
Pasacal Schmikal
Philipp
Schultes Thomas
Scott Marshall
Sergei Shvartsman
Svenja Kuckla
The Carlsons
Trevor Kam
Tucker Ifft
Warren G Strand Jr
William Wallace
웅록 윤
My camera:
Panasonic HC-VX11
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
Building a Huge Rotary Tumbler from Scratch — Homemade Rotary Tumbler youtu.be/c04x6ZF9kKc
Лас-Вегас — столица отдыха и развлечений на любой вкус. Отели и казино — как дворцы, торговые центры — как отдельные миры, знаменитые поющие фонтаны — как произведение архитектурного искусства.
Уникальнейший проект эко-города в городе, стоимостью более 12 млрд долларов — как это создавалось? Какие многомиллиардные риски сопровождали эту стройку века?
Смотрите в шоу «Гигантские стройки!» на канале Discovery!
Технологии не стоят на месте и именно в играх мы чаще всего видим, как появляются новые возможности. Сегодня gameranx представляет вам 10 будущих технологий, которые могут изменить игры.
«10 Upcoming Future Technologies That Could REDEFINE GAMING» — русская озвучка. Автор: gameranx.
Watch this video in English: youtu.be/vaxHresiV_c
Переведено и озвучено командой xDlate Production.
Понравилось видео? Подпишись на наши канал: bit.ly/2OBgmwI
Мощный процесс производства кованых деталей, стальных шариков, автомобильных компонентов, стальных колец, холодной штамповки алюминия и многого другого…
Ковка — самый старый процесс обработки металла. Он берет свое начало в работе кузнецов за много веков до нашей эры.
Это был ручной труд, который зависел от силы руки кузнеца. Замена руки кузнеца произошла на ранних этапах промышленной революции.
С началом промышленной революции были представлены станки, а кузнечная рука была заменена нажимными молотками.
В настоящее время существует разнообразное кузнечное оборудование, способное изготавливать детали самых разных форм и размеров, от штифтов, гвоздей, инструментов и даже гигантских топоров, роторов турбин и крыльев самолетов.
Как дела. Удивительные машины.
Содержание наших видео носит развлекательный характер, а информация, содержащаяся в нем, предназначена для того, чтобы вы знали, что происходит на экране, и имеет определенную образовательную ценность.
Следите за нами в социальных сетях.
Instagram: @tantumtechHD
Твитер: @HDTantum
По вопросам авторских прав обращайтесь на TantumTechHD@gmail.com
Невероятный процесс производства кованых деталей Холодная и горячая штамповка
Невероятные машины и инструменты, которые приятно видеть
Невероятный процесс производства кованых деталей и другие современные методы производства
Самые удивительные машины и инструменты для ковки кованых деталей — Amazing Machines
Сегодня я покажу 20 АВТОТОВАРОВ ИЗ КИТАЯ, КОТОРЫЕ ТЫ ЗАХОЧЕШЬ КУПИТЬ | ЛУЧШИЕ АВТОТОВАРЫ С ALIEXPRESS. В наше время, автомобиль является частью нашей жизни, и мы без него как без рук. На Алиэкспреес очень много товаров для авто. Я покажу самые крутые ништяки, автоприбамбасы и гаджеты для вашего автомобиля. Вы найдете такие товары как съемник для дворников, дорожную сумку на крышу авто, стетоскоп, система контроля давления в шинах и многое другое. Поэтому заказывайте с aliexpress, при этом рекомендую пользоваться кэшбэк сервисом. Не забывайте ставить лайки и подписываться на канал Дешевый Китай.
Условия конкурса
1. Быть подписанным на мой канал.
2. Подписаться на канал спонсора Китайский Скотч — bit.ly/2Ymox4x
2. Поставить лайк и написать комментарий
========================================================
Я ВКОНТАКТЕ:
Группа: goo.gl/RZIk8H
Александр: vk.com/sasha.kroll
========================================================
ПЛЕЙ-ЛИСТЫ МОЕГО КАНАЛА:
КРУТЫЕ ВЕЩИ С САЙТА ALIEXPRESS — goo.gl/t4dhFb
АВТОТОВАРЫ ИЗ КИТАЙ — goo.gl/bXnsRX
ИНСТРУМЕНТЫ ИЗ КИТАЯ — goo.gl/F4t9aS
ТОВАРЫ ДЛЯ МУЖИКОВ с Aliexpress — goo.gl/1DqB64
ЭЛЕКТРОНИКА ИЗ КИТАЯ — goo.gl/CPxNFz
========================================================
Latest video: youtu.be/A7XDC5o_SWU
Making a LADA VAZ 2101 rear axle shorter for my tracked amphibious all terrain vehicle build. It will be placed inside the vehicle with Peugeot Partner brake rotors and calipers installed to it with separate brake master cylinder for each caliper to act as a differential-brake steering unit. If the differential or the half axles I shortened fail for some reason theres easy access to the differential itself and its easier to maintain, too. The brake master cylinders I ordered are actually hydraulic clutch master cylinders that have one output line and filler line which is perfect for the job. Dont know whether the clutch master cylinder itself is good although Ive seen these used on this kind of application before. This differential unit will be coupled with 2001 1.9 D Peugeot Partner five speed gearbox through the locked/welded differential in said gearbox. The power will be transmitted through the left side half axle output. This will result in a considerable gear reduction which is needed. Hopefully it isnt too slow and this machine will be still tolerable when reversing. New video next Friday! Stay tuned!
#donndiy #atv #trackedamphibiousvehicle
Самодельная роликовая опора по цене металлолома /дёшево и сердито/. В ролике расскажу о самодельной роликовой опоре которую я использую в своей столярной мастерской. Сделана она практически из металлолома с минимальными вложениями денежных средств. Эту опору сделал один мой хороший друг и она служит мне уже долгое время. Так же покажу опору в работе и сравню цены на подобные изделия предлагаемые в интернете. Приятного просмотра. ВСЕМ ДОБРА!!!
#DIY #Ilnostrocaso #деревообработка
Приветствую всех подписчиков и гостей канала Il nostro caso — наше дело. Это канал в основном посвящен столярному делу и всему что с ним связано. На канале Вы увидите как делаются различные столярные изделия, а также приемы работы с разным столярным инструментом, оборудование места для деревообрабатывающих станков, различные самодельные приспособления облегчающие работу и расширяющие возможности инструмента. Однако канал не будет ограничен только столярной тематикой, также здесь будут и ролики о интересных проектах которыми я занимаюсь. В роликах постараюсь рассказать максимально понятно и подробно по теме видео, при необходимости буду прилагать схемы и чертежи показываемых устройств.